INTERNAL & ACCESS OPTIONS
Each Hi-Spec tanker is fitted with a 600mm hinged galvanised rear access manhole for cleaning out. With tankers now transporting a variety of slurry of varying viscosity, cleaning out the tanker has become a more difficult problem. To combat this, Hi-Spec has numerous methods to gain easier access inside your tanker.
The addition of or relocation of an access door to the side of the tanker allows the operator to enter the barrel from the side. This is particularly useful when a low emission spreader is fitted on the tanker.
900mm REAR DOOR
A larger 900mm access door can be fitted in lieu of 600mm
to the rear of the tanker to allow easier access inside the
barrel. This 900mm door is hinged and opens the same
as the 600mm. It allows much easier access for cleaning
FULLY OPENING REAR DOOR
A fully opening rear dished end provides unrivalled
access into the tanker. The rear dished end is hinged on
large 20mm hinges and is secured using manual clamps
to the perimeter of the dish. A large rubber seal is used
between the door and the barrel to create an adequate
sealing. This rear door allows the operator to enter the
barrel safely and also allows hazardous vapours to exit
the tanker faster.
For extremely thick or slurries where settlement can occur, the HiSpec internal agitator can ensure that the slurry is kept in constant motion. The internal agitator prevents sediment build up within the tank. The internal agitator is hydraulically operated from the cab. The internal agitator is supported the length of the tanker to ensure that the full tanker is constantly stirred during transportation.
OPTIONS – ACCESS
600mm side door
900mm rear door
Fully opening rear door
OPTIONS – INTERNAL
Internal agitator brackets only