CENTRIFUGAL OPTIONS

JUROP JULIA

Centrifugal pumps use a shaft driven impeller rotating inside a casing to propel liquid slurry. The speed of the impeller allows the slurry to exit the pump at a much greater velocity. These types of pumps can also be used for piping systems due to the high flow rates that can be achieved. A pump change-over allow either the vacuum or centrifugal pump to be used.

The Jurop Julia pump is a combination of two pumps:

HiSpec use Jurop Julia Centrifugal pumps as standard for the disposal of slurry under wet conditions. Standard with a rain-gun, it is also possible to feed a rear spreading implement or and umbilical system via the centrifugal system.  A hydraulically operated rain-gun can jet slurry through 360° and up to a distance of 45m as standard. A rear stonetrap and wide angle PTO are provided as standard for additional pump protection. Centrifugal systems are ideal for slurry spreading in wet weather or over unfavorable ground conditions.

JUROP JULIA FEATURES:
Jurop Julia combination pump
360º rain-gun
Rear stonetrap
Wide angle PTO

Rotates through 360°

BATTIONI PAGANI GARDA

A Battioni Pagani GARDA system can also be fitted in lieu of Julia. A MEC vacuum pump can be combined with a high pressure GARDA centrifugal pump for higher pressure.

The GARDA MEC pump is a combination of two pumps:

BATTIONI GARDA FEATURES:
Battioni GARDA combination pump
360º rain-gun
Rear stonetrap
Wide angle PTO

BATTIONI PAGANI GARDA EVO

A Battioni Pagani GARDA EVO system can also be fitted in lieu of Julia. An 11000 Battioni pump complete with a DODA L35 ensures that you have the perfect combination for splash-plate and umbilical work. This dual pump gives the high performance of an 11000 litre vacuum pump for fast and efficient tanker filling, combing with the benefits of a well proven DODA L35 high pressure slurry pump to allow operation of umbilical systems direct from the feed tanker.

The GARDA EVO dual pump runs with 1000rpm input speed. The compact design of the pump makes it ideal for drawbar mounting on slurry tankers, allowing the DODA pump to be run in a flooded suction capacity, helping to increase pumping efficiency.

BATTIONI GARDA EVO FEATURES:
11000 litre Battioni vacuum pump
DODA L35 PTO drive centrifugal pump
360º rain-gun
Rear stonetrap
Wide angle PTO

DODA

For increased umbilical pumping distances, a DODA L35 pump can be added in combination with a hydraulic driven vacuum pump. The vacuum pump is used to fill the tanker and spread via splashplate as standard. The DODA L35 pump can be fitted with a SAFALLA arm for automatic locking to your umbilical piping.

3500 TD-S with DODA pump & SAFALLA Arm        DODA Pump

DODA FEATURES:
11000 litre Jurop hydraulic drive vacuum pump
DODA L35 PTO drive centrifugal pump
8” hydraulic gate valve to rear of DODA pump
Rear stonetrap

SAFALLA ARM

A SAFALLA Arm is the most efficient method of connecting to your umbilical system. The arm is hydraulically lowered to automatically connect to a non-return pod. This non-return pod is in turn connected to the umbilical piping. The SAFALLA Arm and pod is the cleanest and quickest method for carrying out umbilical work with tankers.

             
2600 SA-R c/w DODA, raingun & SAFALLA Arm    SAFALLA Arm