The Vertical Auger Feeder from HiSpec is a range of tub feeders with capacities from 7M³ to 32M³. There are two styles available, the V series (single auger) with capacities from 7M³ to 16M³ and the T series (twin auger) with capacities from 14M³ to 32M³.
The strength and quality of workmanship is easy to see. An independent reinforced chassis and a single or double axle provide a solid base for the feeder body. There is a choice of tyre options to vary the loading height or feed-out height. The independent chassis features 4 Digi-Star weigh-cells as standard which provide an extremely accurate indicator of feed weight.
All our Vertical Feeders feature a heavy duty robust 20mm floor. HiSpec also incorporates vertical reinforcement to the underside of the feeder floors which helps strengthen the floor from the vertical forces of feed being loaded into the machine. This feature and strength is unique to HiSpec.
The body on all HiSpec Vertical Feeders is made from 8mm high grade steel. The body is virtually wear resistant and is tapered to allow efficient mixing and to maximise volume. All feeders come complete with a straw ring which helps to contain the bales during initial chopping.
HiSpec Vertical Auger Feeders work by using a central auger (V series - one auger / T series - two augers) to carry out both chopping and mixing functions. The auger does this in a very simple cycle action; firstly it draws the feed up the central flighting and then allows it to fall down the tapered sides to repeat the cycle. All the while the auger is rotating the feed around the body.
For chopping, the augers are fitted with self-sharpening serrated knives, they are adjustable for increased or decreased cutting.
HiSpec uses Comer gearboxes as standard on our Vertical Feeder range. A robust PGA planetary gearbox is provided for auger rotation across the HiSpec Vertical Feeder range.
PGA 1602 planetary gearboxes are fitted to smaller V series (V7 - V12) and smaller T series (T14 - T27) feeders as standard. PGA gearboxes possess strong torque characteristics to ensure that the mixers cope with chopping and mixing effortlessly.
Fitted as standard to larger V series (V14-V16) and larger T series (T32) mixers. The PGA 2502 provides greater torque to deal with increased payloads
C3A - Two speed reduction gearbox
Fitted on sizes greater than 12M³ as standard, the C3A allows the auger to rotate as multiple speeds. The low speed setting allows smaller HP tractors to operate the mixers. Operators can choose a high speed setting to provide complete and rapid emptying of the mixer. Optional extra on sizes smaller than 12M³.
Four Digi-Star weigh-cells and an EZ3410 indicator as standard provide you with an extremely accurate feed weight display. The EZ3410 display comes with a fast micro-processor and an easy to read white backlight. The EZ3410 allows you to build a number of recipes, from 1 ingredient with 98 pens to 98 ingredients for 1 pen or any combination in between.
- Additional feedout doors.
- Hydraulic operation of the counter knives.
- Hydraulic discharge chute.
- C3A two speed reduction gearbox. (standard on V14, V16 and all T series feeders)
- Tandem Axle - Both straight and steering available.
- Beet chopping knives.
- Rootchopper attachment.
- Data Analysis Software - Accurate control of feed costs detailed reports and graphs of any data for your analysis.
- Discharge elevators of various lengths up to 1500 mm (59”).
- Cross Conveyor - Allows feed to be discharged from both the left and right hand side.
- Variable Height Discharge (VHD) Cross Conveyor. For more information click here.
- Blower / Straw Bedding Attachment. For more information click here.
To request further information please e-mail us at firstname.lastname@example.org or call us on
+353 59 9721929. Alternatively you can contact us using any of the options on the Contact Us page.