The Vertical Auger Feeder Blower Attachment can be used for the bedding of loose and cubicle sheds, it will blow straw up to 22 metres from the machine. Accurate spreading can be obtained by the operator adjusting the hydraulically operated chute. All shapes and sizes, wet or dry baled material can be used.

The Blower Attachment can also be used for feeding into high troughs, round feeders, or over high walls. The feeder fitted with the blower equipment also has a standard discharge door for floor or low trough feeding. The Blower Attachment is fitted with a two speed gearbox – low speed for feeding, high speed for straw blowing. If the Blower Attachment is not required it can easily be disengaged and the machine can be used as a standard Mixer Feeder.

The Blower Attachment also has the capacity to pulverize fodder/sugar beet, potatoes and other similar type roots. The roots are loaded into the mixer with the other materials and when the load is mixed it is discharged through the Blower Attachment, with the roots being pulverized while the load is being discharged. Small stones in the roots are not a problem.

The machine requires a tractor with at least 100hp and a 1000 rpm P.T.O speed for straw bedding.

Information
To request further information please e-mail us at info@hispec.net or fill in our contact form.